Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the responsiveness of gas cooktops, but still requires an oven to bake in? Discover a dual-fuel range cooker that gives you the best of both worlds.
Many experienced home chefs favor gas cooktops for their superior temperature control and ability to employ advanced cooking techniques like charcoaling. These powerhouse stoves can be costly though, especially if you require an additional gas hook-up as well as an electrician to install it.
What is a 13amp plug?
If you have dual fuel range cooker (also known as a gas and electric oven), then you'll need an appropriate 13 amp plug. The plug should be wired by a certified electrician to the cooker ring.
This ensures that the current flowing through the plug is safe and not excessive, which could result in an electrical fire hazard. The current is controlled by a fuse in the plug. The fuse explodes whenever the current passes through it beyond its capacity, which protects the appliance from an overcharge of electricity.
The fuse is rated at 13 amps, which is shown on top of the plug. This is the maximum amount of current the plug could carry without damaging the appliance or heating the socket. It is important that when replacing fuses you always use the same rated amperage as the original. If you replace the fuse with one that has the different ratings, you run the risk of overheating the socket, and potentially placing yourself and others at serious risk.
A 13 amp fuse will be a type of ceramic that is extremely robust and able to withstand the extreme temperatures generated by the range cooker. The ceramic element is also fire-proof, which makes it a better option than other types of fuse.
There are several ways to install an 13 amp plug. The plug can be connected to a live socket by using screws or a plastic jaw cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.
Before connecting the wires, you might need to take off the cardboard wiring diagram that is positioned over the pins of some plugs. It is essential that the wires be cut to the proper length since cutting them too long could cause them to break when the plug cover is replaced. The earth wire should be the longest in order to connect it prior to the line and neutral pins.
How do I install a 13amp plug?
The vast majority of dual cookers that use fuel in the UK are wired with a 13 amp plug. This is important because ovens draw a substantial current, while normal plug sockets have a 10 amp rating.
In general, new appliances should have a plug installed at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug connected and this could be the reason for the issue.
When connecting a cooker to an existing plug socket, the first thing that needs doing is to ensure that the rating of the fuse in the fuse box matches the plug's rating. This is crucial because a fuse that is not properly sized could be dangerous.
It is also recommended that the fuse has been fully seated in the cartridge, and that there isn't any movement. Next up is to prepare the flex that is to be used. Remove the sheathing to expose the three conductors that are insulated. Use a utility blade to nick the sheathing just beyond the grip of the cord at the point of entry into the plug. This will not penetrate the insulated conductors. The nick should be wide enough to allow the sheathing to split and expand the nick when it is pulled back to reveal the cable beneath. Finally cut off the excess sheathing, leaving approximately 40mm of length that extends beyond the flexing end.
This flex should be placed over the plug with the earth terminal on the top and the neutral and live terminals at the bottom. Using the coloured conductors to guide you and the sheathing is removed from each pin, and the internal cable is then plugged to the appropriate terminal by using the cord grip. If the plug has an screw-type clamp for cords loosen it and pull back the insulation to reveal the copper conductors. Connect each insulated wire to the correct terminal by using the channel inside the plug. Begin with the earth conductor and then the neutral and then the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw of a 13amp plug is 3kw at 230volts. This is a lot of power but the standard fuse that comes with the UK plug won't fail until the cable reaches a hazardous temperature. It is important to be aware of the amount of electricity you use in your kitchen as a defective plug or socket could cause an explosion.
The fuse inside the plugtops are made of ceramic, approximately 25mm in length and 240V mains rated. They will feature a BS kitemark or similar marking on the side and contain sand. Glass or plastic alternatives are available, but should not be used in conjunction with live plugs.
Most dual fuel range cookers in the UK require hard-wired and are not able to plug directly into a wall socket. They are usually connected via a separate cooker circuit which is suitable only for appliances with a maximum of 20 amps.
Check the ring circuit at your home using the fuse box, or ask an electrician in your area. They will be able tell you whether the sockets in your home are on the same ring or separate and if there is a separate circuit for your oven.
If you're considering buying a new dual-fuel range cooker, the size of your kitchen is a crucial aspect to take into consideration. We have a wide range of cookers that can fit any space. Choose from compact 50-60cm dual-fuel models or huge 90cm+ double ovens by leading brands such as Rangemaster and StovesAreUs.
We also have a broad range of multifunction electric and gas cookers. These multi-functional appliances allow you to cook a variety of meals like pasta, casseroles and curries.
Currys offers a broad selection of Cookers. Explore our online collection or visit us in our store to view the range. range oven dual fuel provide free home installation and delivery on a selection of range cookers and flexible payments options. If you have any questions our team is available to assist - just drop us an email or give us a phone call. Credit is subject to status, and terms and conditions apply.
What is the most draw for an appliance switch?
There is a lot of confusion about what the maximum current draw of a cooker switch is. The fact is, most cookers aren't designed to plug into an ordinary socket, but instead are hard wired and fed into a dedicated oven ring circuit. This is because they typically consume more than 20 amps when both the gas hob and electric oven are used.
So, you won't find a dual fuel range cooker that can be connected to a standard socket as this would present a very dangerous fire hazard and is against electrical regulations. A professional electrician will always install any new electrical components to the kitchen cooker and will make sure that the load (both the oven and hob) do not exceed the power capacity of that circuit.
Dual fuel range cookers combine the ability to cook with the sensitivity of a gas stove and the precision and precision of an electric oven. They are therefore popular with chefs as well as home cooks. If you want to try different cooking techniques such as searing and grilling, a dual-fuel range cooker is the ideal option.
When you are looking to purchase an appliance for your kitchen, you'll have to consider a number of factors like size, performance and price. In addition, you will also need to make sure that your house has the right gas hook-up for the appliance. If you're not sure then it's advisable to have an Gas Safe engineer inspect your property prior to installation.
Currys dual fuel range cookers are available with a variety of models to meet all budgets. From budget-friendly models from Indesit and Zanussi, to our own Essentials collection. If you're looking for something more sophisticated we have a selection of premium JennAir models that feature several unique features.
It is crucial to read the instruction manual for the owner prior to purchasing a dual fuel range cooker. This will provide specific information regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber could be required to install it for you. It is also possible to require a dedicated cooker-ring circuit, installed by a certified electrical engineer.